|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
| Software Downloads and Overview Making vehicle testing faster, easier and more effective CORRSYS-DATRON provides a comprehensive range of software optimized to streamline every aspect of the dynamic vehicle testing process. From sensor setup, to data acquisition and evaluation, each of the packages we offer is designed to effectively answer the challenges you face, each and every day. In the lab and on the test track, CORRSYS-DATRON lets you focus on results by making software that works the way you think. In an effort to maximize the efficiency and functionality of our products, CORRSYS-DATRON maintains an ongoing policy of providing new software and software updates as they become available. We can also integrate client-specific functionalities upon request. Please do not hesitate to ask for a quotation. As always, our technical hotline is available to assist free of charge with answers your technical questions. Notes About Installation 1. Copy the downloaded file into a temporary folder on your hard drive. 2. The downloaded file is a self-extracting archive. To open it, double-click on the file icon. 3. You will find many files in the temporary folder after extraction. We recommend that you copy all of these files (except the downloaded file) onto a disk. 4. Run the install.exe file to initiate software installation. You can also start the installation from your disk (if you created one). 5. After successful installation, the files in the temporary folder can be deleted. |
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
CeCalWin Pro 1.8 (revised May 19.08, 9.95 MB) CeCalWin Pro is an easy to operate, Windows®-based program to setup and calibrate CORRSYS-DATRON GmbH sensors as well as to display and log measurement data. CORRSYS-DATRON gives you the power to conduct dynamic vehicle tests based on start and stop triggers, using nothing more than a laptop and our CeCalWin Pro Software. For a higher dynamic and precision measurement, CeCalWin Pro Software is optimized for use with our easy-to-use DAS-3 and DAS-2 systems, which is designed to work seamlessly with CORREVIT¨ Non-Contact Optical Sensors, as well as any sensor that generates a digital, analog, USB, or CAN output. A software license is included. If there are any problems, please contact your nearest CORRSYS-DATRON representative. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||
|
TurboLab Dynamics (revised Jun 06.07, 6.03 MB) TurboLab Dynamics data acquisition software provides a comprehensive solution for data acquisition, incorporating an intuitive user interface designed specifically for dynamic vehicle testing applications. The product of an intensive development and refinement process, this powerful software package is designed with the collaborative input of a core group of vehicle testing engineers from several of the world’s most respected auto-makers. Win2000 or XP required. 3 different levels of hardware are supported by TurboLab Dynamics: PRO: the sensor-only version to communicate with a CORRSYS-DATRON sensor via serial link. ADVANCED: requires external data acquisition hardware connected to your laptop or PC. EXPERT: optimized for use with CORRSYS-DATRON MicroEEP-11 modular data acquisition systems. NOTE: If you have difficulty downloading the software, the problem may be due to restrictions on the size of downloads allowed by your ISP. Please contact your nearest CORRSYS-DATRON representative to receive a copy of the software if you are unable to successfully download it after more than 2 attempts. TurboLab Analysis 6.0 (revised Jan 09.08, 16.5 MB) Non-restricted demo version of professional analysis software with fast data browser and powerful graphical and mathematical tools. TurboLab Analysis 5.0 (4.0 MB) Without license file - demonstration version only. All features fully operational but restricted to demo data files. Professional analysis software with fast data browser and powerful graphical and mathematical tools. DAS-2A data import filter for TurboLab Analysis (revised Mar. 13.06, 70k) The Import filter for TurboLab Signal Analysis enables evaluation of *.d2f data from DAS-2A data acquisition systems. After downloading the file, the filter is easily installed at: "File" -> "Settings" -> "Filter for Data Files...". DAS-3 data import filter for TurboLab Analysis (revised Jan. 09.08, 50k) The Import filter for TurboLab Signal Analysis enables evaluation of *.adf data from DAS-3 data acquisition systems. After downloading the file, the filter is easily installed at: "File" -> "Settings" -> "Filter for Data Files...". TurboLab Dynamics data import filter for TurboLab Analysis (revised Jan. 25.06, 70k) The Import filter for TurboLab Signal Analysis enables evaluation of *.dol data files created from TurboLab Dynamics software. After downloading the file, the filter is easily installed at: "File" -> "Settings" -> "Filter for Data Files...". .dbc files for CORREVIT® sensors equipped with CAN bus interface For CORREVIT® sensors equipped with a CAN bus interface, CORRSYS-DATRON recommends the use of a sensor-specific .dbc file. Each .dbc file stores default CAN protocol information about one specific CORREVIT® sensor type in a standardized format. USB-Adapter (USB 2.0 to RS232 Converter) (revised Jun 01.07, 1.75 MB) USB-Adapter to convert USB-Port into serial interface port. To connect non-USB Corrsys-Datron sensors to a PC without serial interface. CeCalWin Pro software and an available USB-Port are required. Please follow the instructions of the attached installation guide. DAS-2A Firmware V1.30.008 (revised Jan 09.08, 189k) Click above to download the latest firmware for the DAS-2A Data Acquisition System. NOTE: It is not necessary to install a new DAS-2 Add-In for CeCalWin Pro, because this is now included in the latest version of CeCalWin Pro. ATTENTION: It is necessary to use the latest version of CeCalWin Pro to get all the new features in DAS-2A firmware! Manual with all new features will be available soon. For requests or further information about the DAS-2A Firmware, please contact Andreas.Mathes@corrsys-datron.com. DAS-3 Firmware V1.01.008 (revised Apr 22.08, 605k) Click above to download the latest firmware for the DAS-3 Data Acquisition System. NOTE: It is necessary to use the latest version of CeCalWin Pro to get all the new features in DAS-3 firmware. ATTENTION: Only for CPU modules with serial number 871-0####! Driver for 2 MB Pretec SRAM Card with Attribute Memory for Windows 2000/XP(2k) For notebooks that require a driver to read the Pretec SRAM Cards (with Attribute Memory) that are delivered with the CORRSYS-DATRON DAS-2 Data Acquisition System. Driver for SRAM Card with Attribute Memory for Windows 98 (138k) For notebooks that require a driver to read the SRAM Cards (with Attribute Memory) that are delivered with the CORRSYS-DATRON DAS-2 Data Acquisition System. RV3 Calculation Unit Software 4.01 (513 k) Software that allows the calculation unit of RV-3 sensor to calculate output parameters of the sensor from the raw analog voltage. Please contact your nearest CORRSYS-DATRON representative for information about this software. MicroSAT Software (6.6 MB) The latest MicroSAT software offers several new features, including: - sound to denote test start and / or stop - sound for speed above and / or below a set value The new sound features use the PC sound card. Sounds are standard wav files, which can be substituted with your choice alternate wav files. NOTE: ANY PRIOR VERSION(S) OF THE MICROSAT SOFTWARE MUST UNINSTALLED BEFORE INSTALLING THIS VERSION! A new analysis package for post-test processing of MicroSAT data will be available soon. Please contact your nearest CORRSYS-DATRON representative if you have any difficulty downloading software. NOTE: Other software may be available, so e-mail us with your particular request. CORRSYS-DATRON Sensorsystems reserves the right to change or technically improve products without prior notice. All product names are the service mark, trademark or registered trademark of the respective manufacturers. Legacy Software
DARWIN
1.34 (25 MB) DLSx 4.11 (472 k) DOS based, fast and easy software for connecting the CORRSYS-DATRON DLS, and V type sensors to a standard PC to allow for user setup of signal parameters and onsite calibration. This software also allows the function to acquire speed and distance measurements using only the sensor and a laptop PC. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||
|
Sensors and Accessories for Vehicle Dynamics Testing | Data Acquisition Systems & Data Acquisition and Evaluation Software | Information & Support | Vehicle Testing News and Events
Contact CORRSYS-DATRON | About CORRSYS-DATRON
|
||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||
